SOLVED One of the configured repositories failed (MariaDB106)

G

greektranslator

Well-Known Member
Jun 5, 2011
124
10
68
Greece
cPanel Access Level
Root Administrator
I get the error below when trying yum update.

Code: 
System update process has started.

“/usr/bin/yum” reported error code “1” when it ended:  w/ /usr/bin/yum upgrade -y
Loaded plugins: fastestmirror, universal-hooks
Loading mirror speeds from cached hostfile
* EA4: 185.15.22.168
* EA4-experimental: 185.15.22.168
* cpanel-addons-production-feed: 185.15.22.168
* cpanel-plugins: 185.15.22.168
http://yum.mariadb.org/10.6/centos7-amd64/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found
Trying other mirror.
To address this issue please refer to the below wiki article

https://wiki.centos.org/yum-errors

If above article doesn't help to resolve this issue please use https://bugs.centos.org/.



One of the configured repositories failed (MariaDB106),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Run the command with the repository temporarily disabled
            yum --disablerepo=MariaDB106 ...

     4. Disable the repository permanently, so yum won't use it by default. Yum
        will then just ignore the repository until you permanently enable it
        again or use --enablerepo for temporary usage:

            yum-config-manager --disable MariaDB106
        or
            subscription-manager repos --disable=MariaDB106

     5. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=MariaDB106.skip_if_unavailable=true

failure: repodata/repomd.xml from MariaDB106: [Errno 256] No more mirrors to try.
http://yum.mariadb.org/10.6/centos7-amd64/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found

Often errors like this can be resolved by running `yum makecache`

System update process has finished.
These are my repos:

Code: 
yum repolist enabled
Loaded plugins: fastestmirror, universal-hooks
Loading mirror speeds from cached hostfile
* EA4: 185.15.22.168
* EA4-experimental: 185.15.22.168
* cpanel-addons-production-feed: 185.15.22.168
* cpanel-plugins: 185.15.22.168
EA4                                                      | 2.9 kB     00:00
EA4-experimental                                         | 2.9 kB     00:00
cpanel-addons-production-feed                            | 2.9 kB     00:00
cpanel-plugins                                           | 2.9 kB     00:00
http://yum.mariadb.org/10.6/centos7-amd64/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found
Trying other mirror.
To address this issue please refer to the below wiki article

https://wiki.centos.org/yum-errors

If above article doesn't help to resolve this issue please use https://bugs.centos.org/.

EA4/7/x86_64/primary_db                                    | 2.7 MB   00:00
EA4-experimental/7/x86_64/primary_db                       | 116 kB   00:00
cpanel-addons-production-feed/x86_64/primary_db            |  19 kB   00:00
cpanel-plugins/x86_64/primary_db                           |  41 kB   00:00
http://yum.mariadb.org/10.6/centos7-amd64/repodata/repomd.xml: [Errno 14] HTTP E                   rror 404 - Not Found
Trying other mirror.
base/7/x86_64                                            | 3.6 kB     00:00
base/7/x86_64/group_gz                                   | 153 kB     00:00
base/7/x86_64/primary_db                                 | 6.1 MB     00:00
extras/7/x86_64                                          | 2.9 kB     00:00
extras/7/x86_64/primary_db                               | 247 kB     00:00
imunify360                                               | 3.0 kB     00:00
imunify360/primary_db                                    | 1.1 MB     00:01
imunify360-rollout-1/7                                   | 3.0 kB     00:00
imunify360-rollout-1/7/primary_db                        | 1.4 kB     00:00
imunify360-rollout-2/7                                   | 3.0 kB     00:00
imunify360-rollout-2/7/primary_db                        | 1.4 kB     00:00
imunify360-rollout-3/7                                   | 3.0 kB     00:00
imunify360-rollout-3/7/primary_db                        | 1.4 kB     00:00
imunify360-rollout-4/7                                   | 3.0 kB     00:00
imunify360-rollout-4/7/primary_db                        | 1.4 kB     00:00
metrics/7/x86_64                                         | 2.9 kB     00:00
metrics/7/x86_64/primary_db                              | 9.6 kB     00:00
rtm/7/x86_64                                             | 2.9 kB     00:00
rtm/7/x86_64/primary_db                                  | 9.0 kB     00:00
updates/7/x86_64                                         | 2.9 kB     00:00
updates/7/x86_64/primary_db                              |  16 MB     00:00
wp-toolkit-cpanel                                        | 2.9 kB     00:00
wp-toolkit-cpanel/primary_db                             | 3.3 kB     00:00
wp-toolkit-thirdparties                                  | 2.9 kB     00:00
wp-toolkit-thirdparties/primary_db                       |  14 kB     00:00
repo id                              repo name                            status
EA4/7/x86_64                         EA4 ( EasyApache 4 )                  9,865
EA4-experimental/7/x86_64            EA4 Experimental ( EasyApache 4 )       367
cpanel-addons-production-feed/x86_64 cPanel Addons Production Feed            68
cpanel-plugins/x86_64                cPanel Plugins project                   93
MariaDB106                           MariaDB106                                0
base/7/x86_64                        CentOS-7 - Base                      10,072
extras/7/x86_64                      CentOS-7 - Extras                       512
imunify360                           EL-7 - Imunify360                     2,774
imunify360-rollout-1/7               Imunify360 - Gradual Rollout Slot 1       0
imunify360-rollout-2/7               Imunify360 - Gradual Rollout Slot 2       0
imunify360-rollout-3/7               Imunify360 - Gradual Rollout Slot 3       0
imunify360-rollout-4/7               Imunify360 - Gradual Rollout Slot 4       0
metrics/7/x86_64                     OVH METRICS RHEL/ CentOS 7 - x86_64      35
rtm/7/x86_64                         OVH RTM RHEL/ CentOS 7 - x86_64          27
updates/7/x86_64                     CentOS-7 - Updates                    4,101
wp-toolkit-cpanel                    WordPress Toolkit for cPanel              1
wp-toolkit-thirdparties              WordPress Toolkit third parties          16
repolist: 27,931
 
A

aydinoz

Registered
Apr 9, 2022
2
0
1
Turkey
cPanel Access Level
Root Administrator
Today I noticed that repos for Centos 7 versions higher than Mariadb 10.2 were deleted but I couldn't find an official explanation. Does anyone know what causes the problem?
 
cPRex

cPRex

Jurassic Moderator
Staff member
Oct 19, 2014
16,651
2,636
363
cPanel Access Level
Root Administrator
Hey there! We aren't sure either, but we've reached out to MariaDB to see what's going on. I don't have anything to report yet except that this is an upstream issue and not something cPanel can resolve, but once I hear back I'll be sure to post more details.
 
cPRex

cPRex

Jurassic Moderator
Staff member
Oct 19, 2014
16,651
2,636
363
cPanel Access Level
Root Administrator
Update - it looks like MariaDB has adjusted their mirrors and things are working well again. If you're still seeing issues, try the typical commands of:

Code: 
yum clean all
yum makecache
before performing an update and I would expect things to work well at this point.
 
  • Like
Reactions: mtindor
radeonpower

radeonpower

Well-Known Member
Jul 23, 2009
165
6
68
Iceland
cPanel Access Level
Root Administrator
Twitter
Hi all, I'm getting this error:

Error: Failed to download metadata for repo 'MariaDB105': Cannot download repomd.xml: Cannot download repodata/repomd.xml: All mirrors were tried

Edit: Seems to be all fixed now. :)
 
Last edited:
G

greenwater

Member
May 31, 2005
16
0
151
Unfortunately the problem persists.

All installations in the data center have stopped since yesterday!

When we select Mysql 5.7 > MariaDB 10.6, it automatically installs 10.2.,

checkyum version 22.3 (excludes: bind-chroot)
Ensuring that the package “MariaDB-client” with version matching “10.2” is available.

Isn't there an easy solution?

cPRex said:
MariaDB told us it was solved at 12:30 yesterday, so it could be things were still settling on their end. Are things looking better for everyone today?
Click to expand...
 
Boris Horvat

Boris Horvat

Active Member
Jul 29, 2014
26
1
51
Split, Croatia, Croatia
cPanel Access Level
Root Administrator
same problem here...

greenwater said:
Unfortunately the problem persists.

All installations in the data center have stopped since yesterday!

When we select Mysql 5.7 > MariaDB 10.6, it automatically installs 10.2.,

checkyum version 22.3 (excludes: bind-chroot)
Ensuring that the package “MariaDB-client” with version matching “10.2” is available.

Isn't there an easy solution?
Click to expand...
this is not solution...

cPRex said:
For people seeing issues with MariaDB updates, the following document should be helpful:


but that is unrelated to yesterday's issue with the repositories not working.
Click to expand...
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
S The system kernel is at version “6.3.4-060304-generic”, but the system is configured to boot version “5.4.0-152-generic”. Installation & Updates 1
T Yum issue, One of the configured repositories failed (Unknown) Installation & Updates 13
N This Perl hasn't been configured and built properly for the threads module Installation & Updates 0
D Perl configured with threading enabled. Installation & Updates 0
T How should a new server be configured? Installation & Updates 3
Similar threads
The system kernel is at version “6.3.4-060304-generic”, but the system is configured to boot version “5.4.0-152-generic”.
Yum issue, One of the configured repositories failed (Unknown)
This Perl hasn't been configured and built properly for the threads module
Perl configured with threading enabled.
How should a new server be configured?
Top Bottom